Expertos en soluciones adhesivas innovadoras. Descubre nuestras soluciones de adhesión únicas en el mercado y efectivas.
A component of instant adhesive, it is used for bonding EPDM, PVC, TPU, TPR, PA, TPE and other materials. Instant adhesive is characterised by fast drying, high flexibility, very strong bond strength, low tack and low odour.
If you are interested in this product, please fill in the form below. Our team will contact you to provide all the information you need.
A component of instant adhesive, it is used for bonding EPDM, PVC, TPU, TPR, PA, TPE and other materials. Instant adhesive is characterised by fast drying, high flexibility, very strong bond strength, low tack and low odour.
| Appearance | colourless clear liquid |
|---|---|
| Viscosity | 45~60 cps |
| Type | cyanoacrylate |
| Curing time | ≤ 10 seconds. |
| Shear force | 15 MPa |
| Temperature resistance | -40 °C ~ +80 °C |
1, Clean the surface of the materials to be bonded, remove dust, oil, etc.
2, C-762 is coated on the surface of the material, then the surface of the materials is pressed together for a few seconds. The materials are bonded together after a few seconds. Maximum bond strength is obtained after 24 hours.
Store in a cool, dry place. Or in refrigerated storage at 8°C ~ 10°C.
6 months
1, The instantaneous curing speed of adhesive depends on the thickness of the adhesive layer, the curing speed of thin adhesive layer is fast. The thickness of the adhesive layer increases, the curing speed is relatively slow.
2, Do not use knitted gloves to use instant adhesive. The knitted glove absorbs instant adhesive and reacts, the reaction produces a lot of heat, so do not wear knitted gloves to use instant adhesive.
3, Keep the instant adhesive away from children, fire and heat sources.
4, Close the lid tightly immediately after using the instant glue, then store it in a cool and dry place.
5, The surface of the bonding materials should be clean and free of other contaminants, such as oil stains, rust and dust.
